Payment & Shipping Terms:
Natural shell mosaic tiles,
Shell Series Mosaic Tile,
Decorative Mosaic Tile
300mm*300mmShell Series Mosaic Tile Factory In ChinaFor House Decoration
1) Suitable for indoor and outdoor walls, building exteriors and swimming pools and so on
2) High and low temperature resistance
3) Good quality adhesive which stick very firmly and avoid the pieces go off.
4) Washable and durable
5) Dust-proof and the color never fade
6) Acid-proof and alkali-proof
7) Available in different colors and sizes
8) Available in different shapes such as square, round, circular and other abnormities you want
9) Different kinds of mosaics can be mixed for your individual style
|Item||Shell Series Mosaic Tile|
Suitable for interior and exterior, floor and wall, , hotels, houses (Wall backsplash,
TV setting wall,living room, bathroom, kitchen,etc.)
|Package||Cartons and wooden pallet|
|Delivery Time||30 days after receiving the deposit|
|Advantages||1.Dust-proof and Excellent color fade resistance, acid-proof and alkali-proof|
2.Not only suitable for outdoor and indoor decoration, but also dry and wet places such as walls,
kitchens and so on.
|3.Easy to clean, high and low temperature resistant,fade resisitance|
|4. Easy to install with standard tool and material|
|5. Varies type and style : Simple, elegant|
|6.Stable quality good for projects|
Construction Steps of glass mosaic:
1. We suggest adopting professional adhesives and joint filler, and parts of our products adopt neutral adhesives.
2. Use special ash knife to sweep 2-3mm thickness adhesives after cleaning the pavement surface.
3. Use dentate trowel carve to score out waviness on the flat mushy adhesive.
4. Paving mosaic pay attention to align the joints between mosaics with the joints between the product network adhibits.
5.Tenderly pat the surface of the mosaic and leveling treatment to make sure it is adhesive evenly.
6. About 20 hours later when mosaic is totally adhesive, use the special sponge knife to fill the joint fillers in the gaps.
(Soft tool to prevent damaging product surface)
7.After 30 minutes, when the joint filler is semi-dry, use high density sponge to fill into joint about 1-2mm,
which can better show the highlight effect of the product.
8.Use dry towel to clean and finish the construction finally.